Here is automatic school bell electronic circuit that works on the basis of the following criteria
Consider that a school has a total of eight periods with a lunch break after the fourth period. Each period is 45 minutes long, while the duration of the lunch break is 30 minutes. The bell will be ringed to start the class, end of each period, extension at lunch break etc.
Click on the image to enlarge
To ring the bell to start first period, the peon needs to momentarily press switch S1. The 555 timer IC is configured as an astable multivibrator whose clock output pulses are fed to the CD 4017 IC. IC2 increases the time periods of IC1 (4.5 and 3 minutes) by ten times to provide a clock pulse to IC3 every 45 minutes or after 30 minutes, respectively. When the class periods are going on, the outputs of IC3 switch on transistors T1 and T2 via diodes D4 through D12.
To Get the full details of this circuit, Please download this Word document
Custom Search
2 comments:
Now I get the point why our I.T Department fixing our chrono to set the time for our in and out which have signal of five minutes before the time,as well as breaktime bell included.
can i see the whole body design of this device?
Post a Comment